POWER Castle Series 6-20KVA
Introduction
Power Castle C6K(S)~3C20KS is a powerful product range with high adaptability and
flexibility. Its cut-edge digital control technology of DSP (Digital Signal Processor), can
greatly improve the product performance and system reliability, and deliver a compact
integration with higher power density.
Tailored for AC Grid Environment
Output power factor up to 0.8 – applicable to the tendency of future load evolution, and
deliver higher payload capability. Total power factor up to 90% can minimize the power loss
of UPS and utilization cost for user. Active power factor correction (PFC) technology allows
the input power factor approaching to 1, dramatically reducing the immunity on utility
grid. Excellent input frequency range makes UPS suitable to different power supply devices,
i.e. generator set.
Flexible Configuration on Demand
High Scalability: fully meet the customer's demands. Online Intervention: safe and online
intervention without any power supply interruption to load.
Emergency Power Off (EPO): UPS can be instantly shut off in case of any emergency.
Parallel Kit: realize the parallel extension and redundancy function, offer more flexibility and
safety for user's power supply planning.
Compact Design, Lower Noise
With leading control technology and craftsmanship, this UPS can greatly increase the power
density and reduce the footprint, therefore save more expensive space in your office
environment. Additionally, its lower noise during operation can allow you a more comfort
working environment.
Perfect failure protection and alarm function: provide complete failure protection and clear
alarm notification function in case of I/O over-voltage or under-voltage, battery over-charge
or under-voltage, overload, and short circuit.
High Reliability
Its cut-edge digital control technology of DSP (Digital Signal Processor) can deliver higher
quality, performance and reliability and can be suitable to all severe environments. Higher
payload and overload capability, better load compatibility, and suitable for various load type.
Powerful Interference immunity capability in compliance with EMC requirements of
IEC61000-4, deliver your device a clean electric environment.
Rich Communication and Monitoring Features
Provide RS232 interface and communication cable for local ;remote management and
monitoring function.(SNMP), CMC, or AS400 card (dry contact)
Overview
With true double-conversion design, Power Castle series provides powerful and overall protection to your
sensitive devices. It can accept wider input voltage for harsh environment. It's perfect protection for your
precious servers and workstations
Model PC06L PC10L PC3110L PC3120L
Capacity 6KVA/4.8kW 10KVA/8kW 10KVA/8kW 20KVA/16kW
Phase 1/1PHASE OR 3/1APHASE
Input PF ABOVE 0.98
THDi Less than 3%
Input voltage 165~280VAC, or 285v-485v
Input frequency 50/60+/-5hz
Battery
DC voltage
192VDC
(INBUILT OR
EXTERNAL)
192VDC
(INBUILT OR
EXTERNAL)
192VDC (EXTERNAL)
Charge voltage 220VDC
Recharging
current
4.2A/1.5A 4.2A/1.5A 4.2A 4.2A
Battery type Lead-acid Maintanence-free battery
Battery quantity 16PCS*12V
Output
Output PF 0.8
Output voltage 220v/230v/240v +/-1%(static)
frequency 50/60hz=/-0.05HZ
Output current
crest factor
3:1(max)
Wave distortion Less than 2%(linear load), Less than 4% Non-linear load
Over load
10 mins when overload is 105%~130% in AC power model
1s when load is more than 130%
Transfer time
AC-battery, zero transfer time.
By pass-Inverter, zero transfer time
Max parallel qty 5 pcs
Others
Weight (KG) 35/85 40/92 56 56
Dimension(W*H
*D)
248mm×618mm×505mm